CE264-5-AP-NW:
Digital Systems Design
2024/25
Computer Science and Electronic Engineering (School of)
Northwest University
Autumn & Spring
Undergraduate: Level 5
Current
Thursday 03 October 2024
Friday 21 March 2025
15
28 July 2023
Requisites for this module
(none)
(none)
(none)
(none)
CE339
BSC H60E Electronic System Engineering,
BSC H60ECO Electronic System Engineering,
BSC H60ETW Electronic System Engineering
This module will teach students the basics of digital system design at gate level and how complex designs can be constructed from basic components using combinational and sequential logic as appropriate. Students will use various types of digital systems using gate level building blocks.
This module aims to teach students the basics of digital system design at gate level and how complex designs can be constructed from basic components.
After completing this module, students will be expected to be able to:
1. Understand the building blocks of complex digital systems such as registers, counters and memory
2. Describe the implementation technologies used in various types of digital systems
3. Design digital systems building blocks at gate level
4. Design systems using combinational and sequential logic as appropriate and showing an appreciation of timing issues
Outline Syllabus
. Introduction to digital systems design
. Combinational circuit design
. Sequential circuit design
. Design of control and sequencing logic
. Digital system timing
. Implementation technologies for digital systems
Lectures, Labs and Classes
The above list is indicative of the essential reading for the course.
The library makes provision for all reading list items, with digital provision where possible, and these resources are shared between students.
Further reading can be obtained from this module's
reading list.
Assessment items, weightings and deadlines
Coursework / exam |
Description |
Deadline |
Coursework weighting |
Coursework |
Progress Test (Week 3) (In person, MCQ Paper Based Test, Closed Book) |
|
20% |
Coursework |
Design Report |
06/05/2025 |
80% |
Exam |
Main exam: In-Person, Open Book (Restricted), 120 minutes during Summer (Main Period)
|
Exam |
Reassessment Main exam: In-Person, Open Book (Restricted), 120 minutes during September (Reassessment Period)
|
Exam format definitions
- Remote, open book: Your exam will take place remotely via an online learning platform. You may refer to any physical or electronic materials during the exam.
- In-person, open book: Your exam will take place on campus under invigilation. You may refer to any physical materials such as paper study notes or a textbook during the exam. Electronic devices may not be used in the exam.
- In-person, open book (restricted): The exam will take place on campus under invigilation. You may refer only to specific physical materials such as a named textbook during the exam. Permitted materials will be specified by your department. Electronic devices may not be used in the exam.
- In-person, closed book: The exam will take place on campus under invigilation. You may not refer to any physical materials or electronic devices during the exam. There may be times when a paper dictionary,
for example, may be permitted in an otherwise closed book exam. Any exceptions will be specified by your department.
Your department will provide further guidance before your exams.
Overall assessment
Reassessment
Module supervisor and teaching staff
Dr Serafeim Perdikis, email: serafeim.perdikis@essex.ac.uk.
Dr Serafeim Perdikis
School Office, email: csee-schooloffice (non-Essex users should add @essex.ac.uk to create full e-mail address), Telephone 01206 872770(non-Essex users should add @essex.ac.uk to create full e-mail address), Telephone 01206 872770
No
No
No
Dr Wai Chung Tang
Queen Mary University of London
Senior Lecturer
Available via Moodle
No lecture recording information available for this module.
Disclaimer: The University makes every effort to ensure that this information on its Module Directory is accurate and up-to-date. Exceptionally it can
be necessary to make changes, for example to programmes, modules, facilities or fees. Examples of such reasons might include a change of law or regulatory requirements,
industrial action, lack of demand, departure of key personnel, change in government policy, or withdrawal/reduction of funding. Changes to modules may for example consist
of variations to the content and method of delivery or assessment of modules and other services, to discontinue modules and other services and to merge or combine modules.
The University will endeavour to keep such changes to a minimum, and will also keep students informed appropriately by updating our programme specifications and module directory.
The full Procedures, Rules and Regulations of the University governing how it operates are set out in the Charter, Statutes and Ordinances and in the University Regulations, Policy and Procedures.